Shelly Pro EM

Available with 50A and 120A clamps/CTs.

Installation

Note: During installation please ensure that all arrows on the clamps are matching the direction of the energy flow to be measured.

https://shellystore.co.uk/wp-content/uploads/2023/09/Shelly-Pro-EM-50A-Printed-user-guide-English-Deutsch-Italiano-Espanol-Portugues-Francais.pdf

Configuration

1. The device will start in AP mode (WiFi light is blue). Connect to the device's WiFi from your laptop or mobile device.
2. Navigate to http://192.168.33.1 on your device's browser.
3. Set up WiFi to connect to your local network and disable AP mode.

1. Set up MQTT to broadcast data to Busroot. (Ensure generic status update is enabled)
2. Restart the device.
3. WiFi light should change to green.